LR-Cal
LPP 60-T
Since 1989
India
LR-CAL Pressure Comparison Pumps
The LR-Cal pressure comparison test pumps serve as pressure generator for the testing, adjustment and calibration of mechanical and electronic pressure measuring instruments through comparative measurements. The devices can be used in the laboratory or workshop, or on site at the measuring point.
By connecting the test item and a sufficiently accurate reference pressure measuring instrument to the pressure comparator, the same pressure will act on both measuring instruments. By comparison of the two measured values at any given pressure value, a check of the accuracy and/or adjustment of the pressure measuring instrument under test can be carried out.
All LR-Cal pressure comparators, manufactured in our own facilities in Kirchentellinsfurt in the south of Germany are 100% tested for performance, functionality and tightness, before they are shipped to our customers.
Model overview
Pneumatic (operated with ambient air)
Making pressure up to +60 bar (870 psi)
Making vacuum down to -0,95 bar (-28 inHg)
Bench type
Very easy operation, fine volume adjustment
LR-Cal
LSP 1000
Hydraulic, fluid operated (oil or water)
Making pressure up to 1,000 bar
to be mounted on a bench
Incl. priming pump
LR-Cal
LSP 1000-BM
Hydraulic, fluid operated (oil or water)
Making pressure up to 1,000 bar
Incl. basement
Incl. priming pump
LR-Cal
LSP 1200
Hydraulic, fluid operated (oil)
Making pressure up to 1,200 bar
Incl. base plate
Incl. priming pump
LR-Cal
LSP 1600
Hydraulic, fluid operated (oil)
Making pressure up to 1,600 bar
Incl. base blate
Incl. priming pump
LR-Cal
LSP 1600-BM
Hydraulic, fluid operated (oil or water)
Making pressure up to 1,600 bar
Incl. basement
Incl. priming pump
LR-Cal
LSP-4000
Hydraulic, operated with special oil
Making pressure up to 4,000 bar
Incl. basement, compact design
Incl. dual-area spindle pump
LR-Cal
LSP-7000
Hydraulic, operated with special oil
Making pressure up to 7,000 bar
Incl. basement
Incl. priming pump
LR-Cal
BT 400-OX
LR-Cal
BT 800-OX
Free of oil, suitable for Oxygen
Hydraulic, water operated
Making pressure up to 400 resp. 800 bar
Incl. basement
For comprehensive information about a model, please click on the related product image.
Datasheet
Manual
Datasheet
Manual
Datasheet
Manual
Datasheet
Manual
Datasheet
Manual
Datasheet
Manual
Datasheet
Manual
Datasheet
Manual
Datasheet
Manual
Hydraulic Pressure Comparators
When the device under test and a reference measuring instrument with an adequate accuracy are connected to the test pump, the same pressure will act on both measuring instruments after actuating the pump. A calibration or an adjustment can be carried out by comparing the two measured values at any pressure value.
Address:
Adarsh Industries
307, Shankala Industrial Estate, Gogatewadi, Off Aarey Road, Goregaon East, Mumbai - 400063, India
Tel: +91-22-29275496, Fax: +91-22-29275558